CGSA 4000SS Stainless Steel Fertiliser Spreader
If you’re a contractor or farmer putting out hundreds of tons of fertiliser each year, then this is a machine you should take notice of.
Required Horsepower
Minimum: 200 hp
Spreader Capacities
Urea: 3000 kg
Single Super: 4000 kg
Capable of spreading as low as 2kg/ha of Slug Bait (Metarex) @ 24m wide and 14km/h or up to 325kg/ha of Urea @ 30m wide at 14km/hr.
$21,000 ex. GST
$23,100 inc. GST
Longer Lasting means Endless Capability.
The Donder Stainless Steel Spreader combines all the features of standard Donder Spreaders, and adds the longevity and corrosion resistance of stainless steel components.
Over a period of time the fertiliser and similar products that are put through Spreaders are highly corrosive and are likely to deteriorate any painted surfaces. So the Donder Stainless Steel Spreader will easily outlast the best performance of any painted machine on the market.
Compare Donder Spreaders
All prices ex. GST
- 1500 kg Capacity
- 2500 kg Capacity
- 3000 kg Capacity
- 4000 kg Capacity
Painted
- 1500 kg Capacity $11,000+GST
- 2500 kg Capacity $13,000+GST
- 3000 kg Capacity $14,000+GST
- 4000 kg Capacity $16,000+GST
Stainless Steel
- 1500 kg Capacity $15,000+GST
- 2500 kg Capacity $17,000+GST
- 3000 kg Capacity $18,000+GST
- 4000 kg Capacity $21,000+GST
Frequently Asked Questions
Yes, of course, like anything new it’s important to take the time to understand how the machine works and how to calibrate it.
Once you understand the machine generally a full manual calibration for a given product will take 10 minutes.
If calibrated manually Donder Spreaders are exceptionally accurate.
In our experience if calibrated correctly the spreaders can meter rate within a 2% – 4% of desired rate.
All Donder Spreaders come with charts for a limited range of products UREA, CAN & DAP.
In our experience you can expect the charts provided with the spreader to be within 7% for desired rate.
If you are trying to spread a product outside of standard charted products and you don’t want to do a manual calibration contact us and we’ll use our product knowledge and farm experience to assist in recommending a solution and point you in the right direction. Please keep in mind that whenever you change product you must re-calibrate the Spreader to maintain accuracy.
Also, it is important to note that fertilisers, in particular Urea, can vary from supplier to supplier and from load to load so it’s not unusual to have some variation in the rate applied. To be certain of rate the best way to maintain accuracy is to undertake a manual calibration.
Often the products used in Spreaders for farming can be quite abrasive and harsh on machinery. For Farmers or Contractors who put out hundreds of tonnes a tear, choosing a fully Stainless Steel Spreader results a a more robust and resilient machine.
Features
ADJUSTABLE WORKING WIDTHS
Donder’s stainless steel spinners are fitted with adjustable vanes, by moving the position of these vanes along the scale we can adjust the desired spread width per product to ensure an even and accurate spread pattern.
STANDARD - EASY RATE ADJUSTMENT
Rate adjustment requires no tools. Simply unlock the handle and slide the gate to the desired position.
Donder Spreaders come standard as a manual set system. This means you determine the desired rate, spread width & Speed.
Provided you maintain your speed and working width your rate will be accurate.
OPTIONAL - ARAG RATE CONTROL SYSTEM
Looking for something more advanced we exclusively use ARAG Rate Control Systems these areas capable of
Rate Control – Set rate and electric actuators adjust flow to match speed.
Set the desired Rate on your screen and let the electric actuators open and close to match the flow to your ground speed. So you can spread at a varying range of speeds.
VRA Variable Rate Applications – Prescription maps are loaded into the system to set different rates across a paddock.
ACCURATE METERING AT LOW RATES
The metering orifice is designed so that the first section is able to accurately meter low rates of seed (1 – 10kg/ha) & bait whilst once past the neck of the hole the rate can be increased to allow high rates of granulated fertiliser.
STAINLESS STEEL METERING UNIT
FOLDING TARP & MUDGUARDS STANDARD
Some things should just be standard. So Donder Spreaders include components such as protective tarpaulin cover and mudguards ready for whatever conditions you throw at it.
HYDRAULIC SHUTTER CONTROL
Donder Spreaders are fitted with a two-slide mechanism. One slide covers a portion of the opening to set your rate.
The Second Slide is connected to a double acting hydraulic cylinder which is operated in cab. This allows or cuts flow of material onto the spinners.
CAT 3 - QUICK HITCH COMPATIBLE
4000L Donder Spreaders are compatible with category 3 quick hitches, if you are unsure of what category hitch you have on your tractor and whether it will fit please get in touch and we can make sure it will fit.
Accessories
Specifications
BRAND
Donder
WORKING WIDTH
3181 mm
WORKING HEIGHT
2218 mm
WORKING LENGTH
1496 mm
TRANSPORT LENGTH
N/A
TRANSPORT WIDTH
N/A
WEIGHT
720 kg
CAPACITY
4000 lt
POWER
200 hp
Hydraulic Drive Kits
Purchase with your Spreader and SAVE!
User Manuals & Downloads
Download the latest operational manuals and documents for this machine.
Donder CGSA Manual & Spare Part List
READY TO ORDER?
Request a Price, Delivered to your farm
or Ask us for More Info
Not quite what you were looking for?
You May Also Like
CGSA 2500SS Fertiliser Spreader Stainless Steel
$17,000 ex. GST$18,700 inc. GST
CGSA 4000 Fertiliser Spreader
$16,000 ex. GST$17,600 inc. GST
CGSA 2500 Fertiliser Spreader
$13,000 ex. GST$14,300 inc. GST
CGSA 1500 Fertiliser Spreader
$11,000 ex. GST$12,100 inc. GST