CGSA 2500 Fertiliser Spreader
The Donder 2500 Fertiliser Spreader is a mid capacity machine designed to spread various granulated fertilisers that strikes a balance between machine capacity and horsepower requirements.
Required Horsepower
Minimum: 130 hp
Spreader Capacities
Urea: 1700 kg
Single Super: 2350 kg
Capable of spreading as low as 2kg/ha of Slug Bait (Metarex) @ 24m wide and 14km/h or up to 325kg/ha of Urea @ 30m wide at 14km/hr
$14,500 inc GST
shutter control
The Second Slide is connected to a double acting hydraulic cylinder which is operated in cab.
This allows or cuts flow of material onto the spinners.
2500 mm
WORKING HEIGHT
1600 mm
WORKING LENGTH
1300 mm
WEIGHT
480 kg
CAPACITY
2350 lt
By moving the position of these vanes along the scale, you can adjust the desired spread width per product to ensure an even and accurate spread pattern.
working widths
Donder Spreaders come standard as a manual set system. This means you determine the desired rate, spread width & Speed.
Providing you maintain your speed and working width your rate will be accurate.
OPTIONAL ARAG Rate Control System also available.
So Donder Spreaders include components such as protective tarpaulin cover and mudguards ready for whatever conditions you throw at it.
ALL AROUND SPREADER PERFORMANCE
Simple to operate but fully featured. With strong components, proven reliability and versatile use.
The Donder 2500 Fertiliser Spreader does not comprise on safety or quality.
Easy to use and maintain with a full Australia wide spare parts and support team. Donder Spreaders from OzValue AG Australia deliver ongoing performance year after year.
Also available in stainless steel
Starting from $17,500 inc. GST
Frequently Asked Questions
Are these Donder Spreaders easy to calibrate or setup?
Yes, of course, like anything new it’s important to take the time to understand how the machine works and how to calibrate it.
Once you understand the machine generally a full manual calibration for a given product will take 10 minutes.
How accurate are these Spreaders?
If calibrated manually Donder Spreaders are exceptionally accurate.
In our experience if calibrated correctly the spreaders can meter rate within a 2% – 4% of desired rate.
What if I do not want to do a manual calibration?
All Donder Spreaders come with charts for a limited range of products UREA, CAN & DAP.
In our experience you can expect the charts provided with the spreader to be within 7% for desired rate.
Can I get calibration help with from OzValue AG with my Spreader products?
If you are trying to spread a product outside of standard charted products and you don’t want to do a manual calibration contact us and we’ll use our product knowledge and farm experience to assist in recommending a solution and point you in the right direction. Please keep in mind that whenever you change product you must re-calibrate the Spreader to maintain accuracy.
Also, it is important to note that fertilisers, in particular Urea, can vary from supplier to supplier and from load to load so it’s not unusual to have some variation in the rate applied. To be certain of rate the best way to maintain accuracy is to undertake a manual calibration.
Features
Adjustable working widths
Donder’s stainless steel spinners are fitted with adjustable vanes, by moving the position of these vanes along the scale we can adjust the desired spread width per product to ensure an even and accurate spread pattern.
Standard - Easy rate adjustment
Rate adjustment requires no tools. Simply unlock the handle and slide the gate to the desired position.
Donder Spreaders come standard as a manual set system. This means you determine the desired rate, spread width & Speed.
Provided you maintain your speed and working width your rate will be accurate.
OPTIONAL - ARAG RATE CONTROL SYSTEM
Looking for something more advanced we exclusively use ARAG Rate Control Systems these areas capable of
Rate Control – Set rate and electric actuators adjust flow to match speed.
Set the desired Rate on your screen and let the electric actuators open and close to match the flow to your ground speed. So you can spread at a varying range of speeds.
VRA Variable Rate Applications – Prescription maps are loaded into the system to set different rates across a paddock.
Accurate metering at low rates
The metering orifice is designed so that the first section is able to accurately meter low rates of seed (1 – 10kg/ha) & bait whilst once past the neck of the hole the rate can be increased to allow high rates of granulated fertiliser.
Stainless Steel Metering Unit
The metering system components including:
+ Agitator
+ Metering Slides
+ Hydraulic Slides
+ Spinners
+ Spinner Shrouds
are all made from stainless steel to improve the longevity of these machine components and to maintain accuracy over the life of your Donder Spreader.
Folding Tarp & Mudguards Standard
Some things should just be standard. So Donder Spreaders include components such as protective tarpaulin cover and mudguards ready for whatever conditions you throw at it.
HYDRAULIC SHUTTER CONTROL
Donder Spreaders are fitted with a two-slide mechanism. One slide covers a portion of the opening to set your rate.
The Second Slide is connected to a double acting hydraulic cylinder which is operated in cab. This allows or cuts flow of material onto the spinners.
Accessories
OVERVIEW Gallery
Specifications
BRAND
Donder
WORKING WIDTH
2500 mm
WORKING HEIGHT
1600 mm
WORKING LENGTH
1300 mm
WEIGHT
480 kg
CAPACITY
2350 lt
POWER
130hp
