Performed via remote control, through the cylinder and combined with a pantographic mechanism. With the planner axis shifted to one side, the blade is shifted to the opposite side. This allows for greater lateral range, i.e. the blade works at points where the tractor and planner wheels cannot reach.

This enables full range of movement without restriction for cutting in drains and roads.

GTS have designed the blade to maximise material flow off the blade whilst still catering for cutting into hard soils. The replaceable cutting edge means the machine life is extended.

Two double acting cylinders allow a for 60 degrees rotation.

The vertical inclination of the blade allows the performance of works such as:

• Levelling at an angle.
• Construction and maintenance of terraces.
• Opening of drain channels (ditches).

Adjustable working height, controlled hydraulically.

Tackles uneven ground and maintains optimum Grader blade angle.

Optional Adjustable Counter Weights

Ballast of the Planner wheels is recommended to provide more firmness and stability to the equipment. The tires used (18.4×30) in the HD Planner, allow the introduction of 337 litres of water in each one, which provides a good ballast.

This adjustment is performed via remote C2 control, through the cylinder(C2). The objective is to determine the depth of cut of the blade.